How to resolve the problem of the glare and spots of the LED tube light

As our awareness of energy conservation strengthen and LED lighting technology matures , LED lighting market has taken shape, and the market will become increasingly large . There are many manufacturers are currently producing LED lamp on the market , I believe we have to face a difficult problem : LED spot as well as dazzling and strong directional light.

LED tube

For the problems of LED glare, all the manufacturers have adopted a variety of methods,some use the brushed PC mask ,others adopt the frosted mask or use the special phosphor materials, etc. , but these methods are not ideal, the drawing masks can eliminate glare, but the flare phenomenon is more serious , our eye tend to be fatigue under this lamp, if we are exposed to it over a prolonged period of time , but also cause eye astigmatism ; while the light loss of those using the mask and cream frosted is too large , the effect is bad.

LED lighting is one of the market having the bright future , suggest that the engineers spend the more time considering whether the LED lighting is comfortable rather than concerned about the efficiency of LED lamps , the luminous flux and life, I convinced that the technology can solve comfort, which will help you to better capture the market.

After using the above optical film , visual observation eyes feeling each LED is brighter , but not dazzling, the diaphragm makes that LED tube light become more uniform , and the viewing angle is significantly wider. What the working principal of this patch is that light source that is irradiated to the hash above the diaphragm is turn into surface LED light source to uniformly output , so the problem of the glare and illuminated spot and widening the scope can simultaneously be solved . Additionally, the diaphragm light rate is more than 90 degrees,making limited impact on the lighting .

Overall, there are the following advantages after using the optical film:

1. eliminate peculiar spot of the LED . As the ,the rows that is two or three of LED tube regularly arrange, so there may be gaps between the light each point light source emits, so that the spot is generated within a certain distance ; using optical film , the optical film evenly diffused the incident point source light into divergent light emitted , so that the light becomes very uniform, completely solve the problem spot .

(2) broaden the irradiation angle . LED directional light is very strong , the irradiation angle is about 120 degrees, it is prone to lighting blind ; using optical film , due to the unique optical diffusion film ,we can expand the scope of light exposure to 180 degrees, so we can effectively eliminate lighting blind spot.

What the direct benefits brought by the LED tube using the optical film is using the same number of LED tub light to lighting in the same area of ​​space, because there is no radiation blind of the LED tube using the film, light uniformity, lighting effects are far more than ordinary LED tube light. And the larger the area of ​​lighting required , more obvious this advantage is.

Nowadays,the LED flood lights and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life,the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood lights is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile,there a large number of factory engaging in developing and producing the LED light,Lead Lighting is just one of them,which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood lights so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood lights, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood lights and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection. Login http://www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com  to know more awesome LED flood lights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/how-to-resolve-the-problem-of-the-glar-and-spots-of-the-led-tube-light/

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s